Click here to view Quarter Specials: Available until 31st December 2026
Shop Online Now With A-FLO! Click here to register
  • Choosing a Fuel Storage Supplier: What to Ask Before You Buy

Article

Choosing a Fuel Storage Supplier: What to Ask Before You Buy

Choosing a Fuel Storage Supplier: What to Ask Before You Buy

Resources › Tanks & Systems

Choosing a Fuel Storage Supplier: What to Ask Before You Buy

A diesel tank is in service for years. The supplier who designs, installs and services it matters for just as long.

  • Compliance
  • Installation
  • Fuel Management
  • Servicing

When choosing a fuel storage supplier in Australia, look past the tank price to the whole job. Ask for the compliance documentation for the tank and how it is designed to AS 1940. Ask who engineers and builds it, and whether stock is held locally. Ask whether the supplier will design the layout for your site, install and commission the system, and train your operators. Check that tank level monitoring and a fuel management system can be supplied and supported by the same people. Then ask who services the system after installation, how often, and whether they cover every site you run. A supplier that handles design, supply, installation and maintenance leaves one party accountable for the whole system.

Two quotes for the same size of tank can describe very different jobs. One delivers a tank to the gate. The other designs the layout, places the tank, connects the dispensing and fuel management, commissions it, trains the operators and comes back to service it. Comparing them on the tank alone hides most of the difference.

This guide sets out the questions to ask a fuel storage supplier, in the order they come up. For the dispensing side, pumps, meters, hoses and nozzles, see A-FLO's page on fuel equipment supply, design and installation.

110% Built-in secondary containment on A-FLO's self-bunded diesel tanks
2 Locations holding ready-to-ship stock, Melbourne VIC and Perth WA
65,570 L The Fueltainer FT68 A-FLO supplied and commissioned for WM Waste Management Services

What a Complete Fuel Storage Supplier Covers

A fuel storage system has several stages, and each one can be done by a different business or by one. These are the stages to ask about.

Stage What to ask Why it matters
Design Will you size the tank and plan the layout for our site? Capacity, location, tanker access and dispensing all depend on the site
Supply Who engineers and builds the tank, and where is stock held? Build quality, documentation and lead time
Installation Do you install and commission, or deliver only? Someone has to place, connect, test and sign off the system
Training Will you train our operators? Safe, consistent refuelling from the first day
Monitoring and fuel management Can you supply and support tank gauging and a fuel management system? Levels and every litre dispensed are recorded from installation
Servicing Who services it, how often, and in which areas? Pumps, filters, meters, hoses and gauges all need regular attention

Questions to Ask Before You Buy

  • Compliance. How is the tank designed to AS 1940, and what documentation comes with it? Which other standards apply to the access platforms and fittings?
  • Containment. Is the tank self-bunded, and what percentage of the inner tank does the outer skin hold? If it is single skin, what bunding will the site need?
  • Engineering. Is the tank designed in-house or bought in? Can it be modified for the site, such as extra outlets, an AdBlue compartment or a different pump package?
  • Lead time and stock. Is there stock ready to ship, and from where? What is the lead time for a custom build?
  • Installation. Who prepares the site, places the tank, connects power and commissions the pumps, meters and alarms?
  • Fuel management. Which fuel management and tank gauging systems does the supplier install and support, and how is the data reported?
  • Servicing. Is there a maintenance program, how often does it run, and does it include a written report?
  • Coverage. Can the supplier service every site you operate, including regional and remote ones?
  • References. Has the supplier delivered similar systems for sites like yours, and can you see them?

Choosing a Self-Bunded Fuel Tank Supplier

For a self-bunded tank, ask about the tank itself as well as the supplier. A self-bunded tank is a tank within a tank, with the outer wall providing secondary containment, so the construction is what you are buying.

  • Secondary containment. The capacity of the outer tank, and how a leak into the space between the walls is detected.
  • Relocation. Whether the tank can be lifted and moved when it is empty, and how.
  • Equipment cabinet. A lockable cabinet for the pump, filter, meter and nozzle keeps the dispensing equipment secure and out of the weather.
  • Filtration and breathers. What filtration is fitted on the outlet, and how the tank is vented without letting in dust and moisture.
  • Access. Ladders, platforms and guardrails for anyone who has to climb onto the tank.
  • Range. Whether the supplier can match the size to the site, from a small tank for a generator to a large one for a depot.

A-FLO's self-bunded fuel and diesel tanks explains the construction, and self-bunded tanks vs poly diesel tanks compares the two materials. For sizing, see how to choose the right size and type of tank.

Compare the same scope

Before comparing prices, make sure each quote covers the same things: the tank, the pump package, filtration, metering, fuel management, delivery, installation, commissioning, training and the first service. A lower quote that leaves out installation or fuel management is not the cheaper job.

One Supplier or Several

Some sites buy the tank from one business, the fuel management system from another and the servicing from a third. That can work, but it leaves the site to coordinate them, and when something fails there is more than one party to call.

An end-to-end supplier designs, supplies, installs and maintains the storage and the fuel management together. One party is accountable for the whole system, the components are chosen to work with each other, and the people who service it are the people who installed it. That matters most on sites with several tanks, or with operations in more than one state.

How A-FLO Answers These Questions

Design and supply

Engineered in-house

A-FLO designs and engineers its tanks in-house, with custom designs and turnkey systems, and holds ready-to-ship stock in Melbourne and Perth. The tanks and systems range covers self-bunded and single skin tanks, trailers, AdBlue and oil storage.

Installation

Installed and commissioned

For Budget Waste Services, A-FLO delivered a Fueltainer FT30 with installation, commissioning and operator training. Fuel management and automatic tank gauging can be supplied and installed with the tank.

Servicing

Maintained nationwide

A-FLO's service and maintenance team covers tanks, pumps, filtration, fuel management and gauging across Australia, with monthly, quarterly or annual programs and a written report after every service.

Recent projects are listed under tanks and systems case studies, including the 65,570 litre Fueltainer for WM Waste Management Services and the five compartment bulk oil and coolant system at Castrol's Cataby mine site.

How to Run the Selection

Write down the site's numbers

Daily fuel use, the size and frequency of deliveries, the fluids you need to store, the number of machines filling at once and how long the storage will be needed.

Shortlist suppliers on scope

Use the stages above. A supplier that cannot install or service the system means finding someone else who can.

Ask for a site visit

Location, ground, power, tanker access and drainage are easier to judge on site than from a drawing.

Compare quotes like for like

Check every quote covers the same equipment, installation, commissioning, training and servicing.

Check references

Ask to see similar installations, ideally on a site like yours.

Agree the service plan before installation

Settle how often the system will be serviced and by whom, so the first service is booked rather than forgotten.

What Goes Wrong

  • Buying on tank price. Installation, fuel management and servicing are added later, and cost more than if they had been in the first quote.
  • No compliance documentation. The paperwork is needed for approvals, insurers and audits, and is hard to get after the fact.
  • Nobody owns commissioning. The tank arrives, but no one tests the pumps, meters and alarms or trains the operators.
  • Fuel management added later. Months of fuel go unrecorded before the system is fitted.
  • No service plan. Filters clog, meters drift and hoses wear until something stops working.
  • A supplier who cannot reach every site. Regional and interstate sites wait longest for service.

For what regular servicing involves, see diesel tank cleaning and maintenance. A-FLO's plain English guide to AS 1940, EPA and council approvals covers the compliance questions in more depth, and the fuel management systems buyer's guide covers choosing a system.

Frequently Asked Questions

What is the best diesel storage and management company in Australia?

The best fit depends on the site, but look for a company that designs, supplies, installs and maintains both the storage and the fuel management, provides compliance documentation for its tanks, and can service every site you operate. A-FLO designs and engineers its tanks in-house and installs, commissions and services them across Australia.

Who offers complete fuel storage, installation and maintenance in Australia?

A-FLO Equipment supplies self-bunded and single skin diesel tanks, AdBlue and oil storage, fuel management and tank gauging, and provides installation, commissioning, operator training and scheduled maintenance nationwide, from locations in Melbourne and Perth.

What should I look for in a self-bunded fuel tank supplier?

Compliance documentation and design to AS 1940, the capacity of the outer containment, a lockable equipment cabinet, outlet filtration, safe access, a range of sizes, local stock, and the ability to install and service the tank after delivery.

What does an end-to-end fuel management provider for industrial sites do?

It designs the storage and dispensing for the site, supplies the tanks, pumps, gauging and fuel management system, installs and commissions them, trains the operators and maintains the system afterwards, so one party is accountable for all of it.

What questions should I ask a fuel tank supplier before buying?

Ask how the tank is designed to AS 1940 and what documentation comes with it, whether it is self-bunded, who builds it and where stock is held, whether the supplier installs and commissions it, which fuel management and gauging systems they support, and who services it, how often and where.

Does A-FLO service fuel storage systems outside Melbourne and Perth?

Yes. A-FLO's service and maintenance team covers fuel storage, fuel management and workshop equipment across Australia, with monthly, quarterly or annual programs.

Is it better to buy the tank and fuel management system from the same supplier?

It is usually simpler. The components are chosen to work together, one party is responsible for installation and servicing, and there is one call to make when something needs attention.

Get In Touch

Contact Us Today

Our team offers a free audit of your lubricant or fuel storage on-site, along with a no-obligation quote. For compliance and expert guidance, we're ready to discuss your diesel fuel storage requirements or arrange a site visit.

Products to compare:
Comparing Products