What diesel pumps does A-FLO supply?

A-FLO supplies electric diesel transfer pumps in 12V, 24V and 240V, petrol and diesel engine-driven pumps, air operated diaphragm pumps, hand operated rotary and lever pumps, and diesel fuel bowsers, from PIUSI, ULTRAFLO, Ecokit, Gespasa, GRACO and RAASM.

What flow rate do I need?

Electric pumps in the range run from around 40 L/min through to 100 L/min and above. Mobile and ute-mounted refuelling is generally well served at 40-60 L/min, while depot and bulk transfer benefit from higher flow to keep refuelling time down.

Should I buy a pump only or a complete kit?

A complete kit includes hose, automatic shut-off nozzle, inline flow meter and mounting hardware, matched and compatible from the outset. A pump-only unit suits an installation being designed around existing plumbing and reels. A-FLO stocks both.

Which pump suits a site with no power?

Engine-driven pumps run from their own petrol or diesel engine and need no external supply, and hand operated pumps need nothing at all. A-FLO supplies ULTRAFLO engine-driven pumps from 2.4HP to 6.5HP and a range of rotary and lever hand pumps.

Can diesel pumps be linked to a fuel management system?

Yes. PIUSI pumps integrate with FLUIDTRACK and PIUSI Bsmart fuel management systems, giving access control and digital transaction recording at the dispensing point.

Talk to us Contact Your Local A-FLO Representative

Select your state below

Dean Cook

General Manager

0437 038 620 dean@aflo.com.au

Sam Cook

Workshops & Projects Manager

0439 025 266 sam@aflo.com.au

Patrick Chisholm

Workshop Fitouts BDM

0499 994 027 patrick.chisholm@aflo.com.au

Adrian Mack

Tanks & Systems BDM

0461 288 529 adrian.mack@aflo.com.au

Frances Dimech

National Sales & Marketing Manager

frances.dimech@aflo.com.au

Scott Mordue

NSW Business Development Manager

0407 388 729 scott.mordue@aflo.com.au

Jack Cudina

NSW BDM — Tanks & Systems

0461 288 822 jack.cudina@aflo.com.au

Phil Walsh

QLD Business Development Manager

09425044444 Phil.Walsh@aflo.com.au

Shannon Dally

WA Business Development Manager

0417 948 286 Shannon.dally@aflo.com.au

Rachel Tiongco

WA Sales Support Coordinator

0492 009 322 rachel.tiongco@aflo.com.au

Tony Carayannopoulos

SA/NT Business Development Manager

0447 258 543 tony.c@aflo.com.au

Adrian Mack

Tanks & Systems Business Development Manager

0461 288 529 adrian.mack@aflo.com.au

General Range — Diesel Equipment

Diesel Pumps — Electric, Engine-Driven, Air and Hand Operated

A-FLO stocks a comprehensive range of diesel transfer pumps, fuel bowsers, electric fuel pumps, engine-driven, air operated and hand operated pumps for farms, fleets, mining, construction and workshops across Australia. Brands include PIUSI, ULTRAFLO, Ecokit, Gespasa, GRACO and RAASM, with complete kits and nationwide delivery.

12V / 24V / 240V Engine-Driven Air Operated Hand Operated Diesel Bowsers

5 Pump types covering every diesel transfer application

40–100+ L/min flow rates across the electric pump range

6 Brands — PIUSI, ULTRAFLO, Ecokit, Gespasa, GRACO, RAASM

Kits Complete with hose, nozzle, meter and mounting hardware

Overview

The Power Source Decides the Pump

Diesel pump selection starts with what is available where the fuel is. A ute in a paddock has 12V and nothing else. A workshop bay has mains power. A wash-down area may have compressed air but restricted electrics. A remote pad has none of it, which is where engine-driven and hand operated pumps earn their place.

From there it is flow rate and duty. A-FLO supplies each type as a standalone pump or as a complete kit including hose, automatic shut-off nozzle, inline flow meter and mounting hardware — which saves installation time and guarantees the components are matched from day one.

Choosing by power source

12V and 24V DC — ute-mounted, field service and vehicle electrical systems, typically 40-60 L/min
240V AC — mains-powered workshop and depot pumps at higher flow
Engine-driven — petrol or diesel engines where no power exists at all
Air operated — where compressed air is available and electrics are restricted
Hand operated — low volume, field service and back-up

Diesel Pump Groups

Sub-category

Electric Fuel Pumps

12V, 24V and 240V electric diesel transfer pumps from PIUSI, ULTRAFLO and Fill-Rite, as pump-only units or complete refuelling kits.

Sub-category

Diesel & Petrol Powered Transfer Pumps

ULTRAFLO petrol and diesel engine-driven pumps from 2.4HP to 6.5HP with Viton seals, for sites with no power supply.

Sub-category

Air Operated Diesel Transfer Pumps

GRACO Husky AODD diaphragm pumps and ULTRAFLO ratio pumps for compressed-air installations.

Sub-category

Hand Operated Diesel Pumps

ULTRAFLO rotary barrel and high flow drum pumps for 205L drums, plus lever piston hand pumps.

Sub-category

Diesel Fuel Bowsers

PIUSI Cube bowsers at 70 and 90 LPM, ULTRAFLO cabinet pumps and pedestals with user access options.

Agriculture Mining & Resources Civil Works Transport Fleets Fleet Workshops

Choosing

Specifying a Diesel Pump

Four answers narrow the range quickly: what power is available at the dispensing point, what flow rate the job needs, what the fuel is being drawn from, and whether consumption has to be recorded.

Four questions

Power available — 12V, 24V, 240V, compressed air, or nothing at all
Flow rate — 40-60 L/min suits mobile refuelling, higher for depot and bulk transfer
Drawing from — drum, tank or IBC, which decides mounting and suction arrangement
Recorded? — PIUSI pumps integrate with FLUIDTRACK and Bsmart for access control and transaction logging

Matching a pump to your application?

Tell A-FLO the power available, the flow rate you need and what you are drawing from, and our team will specify the pump or complete kit to suit.

Call 1300 235 623 Contact Us Online

Want to order online?

Diesel Pumps

Talk to us Contact Your Local A-FLO Representative

Diesel Pumps — Electric, Engine-Driven, Air and Hand Operated

The Power Source Decides the Pump

Diesel Pump Groups

Specifying a Diesel Pump

Matching a pump to your application?

Products to compare: